Jotun Pilot II is a one component oxidatively drying alkyd coating that has a gloss finish with good gloss retention. To be used as topcoat in atmospheric environments.

Jotun Pilot II is recommended as a topcoat, and for touch-up purposes for marine engines, topside, deck and superstructure areas and for a wide range of industrial structures.

Approvals and certificates

Low flame spread certificate acording to IMO/Solas directive
Grain, Newcastle Ocupational Health
Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
Additional certificates and approvals may be available on request.

Features & Benefits

Reduces application cost
No special painting skills required
Nice finish
Reduces your application costs
Requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers
No special painting skills required

Surface tolerant
Surface tolerant and excellent application properties regardless of which equipment you use
Can be applied to any surface of new or aged coatings in atmospheric conditions

Aesthetical appearance
Provides a high gloss finish that makes your coated surface look smooth, clean and appealing

Primers
Together with primers like Alkydprimer or Pilot QD Primer, Pilot II will form a low to medium corrosion protection system, respectively, as defined by ISO 12944.

Recommended for topside, deck and superstructure.

Protective:
Suitable for a wide range of industrial structures.

Colours
Use the colour picker for any RAL or BS chart offering

Jotun Finishing Coat Drying

Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and within the DFT range of the product.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage.

Dried to over coat, minimum: The shortest time allowed before the next coat can be applied.

Surface (touch) dry: The state of drying when slight pressure with a finger does